Author: Zack Snyder

Westlake Environmental offers a series of chemical pump cabinet options

Cabinets are superior in design in that:

1. Each pump is fully contained
2. Each pump is in a housing that is resistant to sulfuric acid as well as caustic
3. Front cover door is an acrylic or Lexan material that drops towards you when opened
4. Each pump includes a dedicated electric disconnect switch
5. Each pump has a series of isolation valves for quick servicing/removal of pump
6. Pumps are offered in a series ranging from one to six enclosures

Our Solution:   Provide a single skid Inclined Plate Clarifier (IPC) system to remove solids from a waste stream.  System is ideal for granite facilities and stone fabrication plants.

System includes:

1. Chemical Addition System and Inclined Plate Clarifier in A36 carbon steel material on a common skid for quick and easy installation
2. AOD sludge pump as well as an AOD effluent chamber transfer pump
3. Air assembly systems for both AOD pumps
4. OSHA ladder and platform to witness the internals of both tanks
5. Sludge auger to convey sludge to a common discharge point.  Very efficient system
6. NEMA 4X control panel to control all electrical devices included with the system
7. A series of 120V outlets for customer to control additional electrical devices

Our Solution:   Provide pH adjustment tank prior to a Dissolved Air Flotation system to automatically adjust the pH of the water.

Tank includes:

1. Tank is polyethylene material
2. 16” inspection port and 2” drain
3. Individual level switches for automatic transfer pump control
4. pH control systems to monitor the pH of the water and automatically activate chemical dosing pumps

Our Solution:   Provide a Dissolved Air Flotation system in 304 stainless steel material, which was necessary to handle the low pH of the water.  NOTE:  There is also an Oil Water Separator in the background currently under construction.

System includes:

1. DAF in 304 stainless steel material
2. 304 stainless steel air header system
3. Integral recycle pump

Oil Water Separator is carbon steel material with robust industrial paint coatings, exterior color is safety blue.

Our Solution:   Provide quad cartridge filters to remove trace solids from a waste stream, 4 skids total.

System includes:

1. 304 stainless steel housings
2. 10-micron bags
3. PVC SCH.80 piping and valves
4. UV water disinfection system on each skid
5. Control panels for UV lights

Our Solution:   Provide a Dissolved Air Flotation system to remove solids and oils from a waste stream.

System includes:

1. DAF in 304 stainless steel material
2. 304 stainless steel air header system
3. PVC SCH.80 chemical injection tube – located prior to the DAF for chemical addition

Our Solution:   Supply spare pump skids to prevent lengthy down times.  Customer is being proactive due to lengthy supply shortages.

Parts include:

1. Centrifugal pump skids with integral flow meters/GPM readouts
2. Air Operated Diaphragm pump skids
3. Positive Displacement pump skids
4. All skids include local disconnects for safety

Our Solution:   Provide a cartridge filter system to remove solids from a waste stream. 

System includes:

1. 304 stainless steel housings
2. 25-micron bags
3. PVC SCH.80 piping/Cast iron valves

Our Solution:   Provide an OWS to remove free and suspended oils and grease from the waste stream.  System includes:

1. A-36 Carbon steel material
2. PVC coalescing media
3. Expanded effluent chamber

Our Solution:   Provide a system to adjust the pH of the water and remove oils from a waste stream.  Truck 1 of 2 shown.  System includes:

1. CAS in 304 stainless steel material with mixers, chemical pumps and pH probe
2. OWS in 304 stainless steel material with 304 stainless steel media
3. 304 stainless steel walkway with stairs
4. 2,000-gallon effluent tank
5. 1,000-gallon sludge holding tank
6. Thirteen various level switches/ level transmitters/turbidity meters shipped loose
7. Three air operated diaphragm pumps, each skid mounted
8. On-site support and training