News

Our Solution:   Provide a system to adjust the pH of the water and remove oils from a waste stream.  Truck 1 of 2 shown.  System includes:

1. CAS in 304 stainless steel material with mixers, chemical pumps and pH probe
2. OWS in 304 stainless steel material with 304 stainless steel media
3. 304 stainless steel walkway with stairs
4. 2,000-gallon effluent tank
5. 1,000-gallon sludge holding tank
6. Thirteen various level switches/ level transmitters/turbidity meters shipped loose
7. Three air operated diaphragm pumps, each skid mounted
8. On-site support and training

The additional space will allow for the hiring of additional engineers and staff.

These additional 12 clarifiers make a total of 30 purchased by the same customer. Customer states they are user friendly and easy to maintain.

Our Solution:   Provide two Emulsion Cracking Systems (ECS) to remove emulsified oils from a waste stream.   Operators state that the systems are easy to operate and maintain.  Each system includes the following:

1. Tank manufactured in 304 stainless-steel with fiberglass walkway grating
2. Mixers
3. Chemical pumps
4. pH probe assemblies to automatically control the chemical pumps
5. Integrated walkway
6. On site project management and programming

Our Solution:   Provide a bulk bag discharge system. System includes the following:

1. Heavy duty bulk bag lifting frame
2. Bulk bag liner clamp
3. Bag tensioning frame
4. Bulk bag spout closure bars
5. Discharge chute/hopper

Our Solution:   Provide a custom filter press to dewater sludge. System includes the following:

1. Automatic plate shifter
2. Hydraulic Power Unit (HPU) in its own enclosure
3. Actuated valves
4. Bombay doors
5. Safety light curtains and custom guarding to meet customers safety specifications
6. Training

Our Solution:   Provide two Activated Carbon Systems to remove organic contaminant from a waste stream.  Systems include:

1. 304 stainless steel skids
2. Spiral wound FRP tanks
3. Sch.80 PVC pipe
4. Pneumatic diaphragm control valves
5. On site programming

Our Solution:   Provide a 100 cubic foot filter press to dewater sludge. System includes:

1. 100 cubic foot filter press with superior safety features to keep operators safe
2. Walkway assembly – frame/kickplates/posts made in A-36 carbon steel
3. Two dual AOD pump assemblies to feed the filter press

Our Solution:   Provide a CAS and IPC system to remove metals from a waste stream.  System includes:

1. A-36 carbon steel tanks with coal tar epoxy interior/polyurethane exterior coatings
2. Sludge auger in IPC to convey sludge to a sludge outlet port
3. Sludge pump to convey sludge from IPC to a sludge holding tank
4. Effluent pump to convey IPC processed water to sewer
5. Expanded effluent chamber in IPC
6. OSHA platform to view inside of both tanks
7. NEMA 4X 304 stainless steel control panel
8. Entire system mounted to a common skid for quick installation