News

• 

• 

Our Solution:   Provide an Oil Water Separator to remove oils and grease from a waste stream.  Tank includes:

1. A-36 carbon steel tank with coal tar epoxy interior and polyurethane exterior coatings
2. PVC coalescing media
3. Lids to allow for outdoor installation
4. Expanded effluent chamber

• 

• 

Our Solution:   Provide a custom designed sludge holding tank.  Tank includes:

1. A-36 carbon steel tank with coal tar epoxy interior and polyurethane exterior coatings
2. Ladder assembly for access to the top of the tank
3. Safety handrails around the top of the tank
4. Several flanges along the side and in the top of tank
5. Inspection hatch located in top of tank for quick inspection

Our Solution:   Provide a Dissolved Air Flotation system to remove Fats, Oils and Grease (FOG) and Suspended Solids (TSS) from a waste stream.  System consists of the following:

1. 304 Stainless steel tank with PVC Sch.80 piping
2. Recycle pump assembly
3. Skimmer assembly
4. Several level switches for automatic control
5. Lids with inspection ports

• 

• 

• 

• 

• 

Both systems combined include the following:

1. 4 Oil Water Separators, 8 reaction Tanks and 12 Inclined Plate Clarifiers
2. 4 mixed bed DI systems, 4 Activated Carbon systems and 2 water softeners
3. 32 varying pump skids using centrifugal/air diaphragm/progressive cavity pumps
4. 70 chemical pumps located in “Safe” cabinet enclosures with disconnects
5. 36 mixers and 36 pH probe assemblies controlled by local control cabinet
6. Other items such as pressure transmitters/radar sensors/flow sensors also supplied
7. On-site project management and programming support

Our Solution:   Provide a Deionization system to remove impurities in the customers rinse water. System consists of the following:

1. Carbon steel tanks with Sch.80 PVC piping
2. Chemical pump cabinets with quick disconnects for safety – shipped loose
3. Pneumatic PVC valves
4. Control panel
5. On site project management and programming

Our Solution:  Provide a complete Activated Carbon System, which includes spiral wound FRP tanks, PVC Sch.80 piping, 304 stainless steel control panel and pneumatic diaphragm control valves.  System completely piped, wired, and tested, ready for installation on a concrete pad.

Our Solution:  Provide a complete wastewater system that includes Oil Water Separators, Inclined Plate Clarifiers, Chemical Addition Systems, Neutralization Tanks, Water Softeners, Cartridge Filters, Activated Carbon and Deionization systems.

Address:  11944 U.S. Highway 31, Grand Haven, MI 49417

Our Solution:   Provide an Oil Water Separator (OWS) to remove oils and grease, followed by a Chemical Addition System (CAS) and Dissolved Air Flotation (DAF) clarifier to remove suspended solids.  System includes:

1. Oil Water Separator with oil/sludge pump out package.
2. Chemical Addition System with mixers, chemical pumps and pH probe.
3. Dissolved Air Flotation clarifier with pH probe, turbidimeter and controller.
4. Level switches in each tank for full automation.
5. Fully wired, tested and ready for installation on concrete pad.

Our Solution:   Provide an Inclined Plate Clarifier to precipitate and remove metals from a waste stream.

1. Rated for 80 GPM flow rate.
2. Carbon steel material with polyurethane exterior coatings.
3. Includes integral polymer addition chamber.
4. Tank includes a mixer and control panel.