News

Our Solution:   Provide clarifiers to precipitate and remove metals from a waste stream.  Tanks are shipping to several facilities.

1. Durable interior coatings due to high suspended solids levels
2. Robust polypropylene interior plates to settle solids
3. Plate pack can be removed as one piece, which allows for easy cleaning

Our Solution:   Provide activated carbon skids to further clean water after treatment process

1. 304 stainless steel skids
2. FRP wound tanks
3. Sch.80 PVC plumbing
4. Actuated valves
5. On site programming

Our Solution:   Provide 8 replacement Netzsch pump skids – 2 of 8 shown

1. 304 stainless steel skids with forklift lifting points
2. Primary and secondary Netzsch pumps plumbed in Sch.80 PVC
3. Each pump has its own disconnect for safety
4. Flow meter and readout to monitor flow rate through either pump
5. Filter housing on suction side of pumps to remove debris in water

Our Solution:   Provide a Deionization system to remove ionic material from prefiltered water.

1. Carbon steel tanks with Sch.80 PVC piping
2. Provide 14 chemical pump cabinets with quick disconnects for safety
3. Primary and secondary transfer pump skid
4. Control panel
5. On site project management and programming

Our Solution:   Provide two Emulsion Cracking Systems (ECS) to remove emulsified oils from the wastewater.   Each system includes the following:

1. Manufactured in 304 stainless steel
2. Mixers
3. Chemical pumps
4. pH probe assemblies to automatically control the chemical pumps
5. Walkway
6. On site project management and programming

Client Background:  Customer manufactures shaped food cans

Application:  Oils and solids removal from a waste stream

Our Solution:   Provide a complete wastewater system including on site project management and programming assistance.  System includes the following:

1. Industrial holding tanks
2. Chemical dosing pumps with custom safety cabinets
3. Cationic and Anionic Polymer mixing and dosing systems
4. Mixers, pH transmitters, radar sensors, float switches and flow meters
5. Pump skids
6. On site programming

Client Background:  Customer uses aluminum to manufacture aerosol cans

Application:  Remove elevated levels of oils and solids from a waste stream

Our Solution:   Supply a complete turnkey system to remove oils and solids from the waste stream.  The system includes Oil Water Separators to remove oils, Chemical Addition Systems, Inclined Plate Clarifiers, and Neutralization Tanks to remove the solids, and a final sample tank to measure pH, turbidity and hardness.

Client Background:  Customer uses aluminum to manufacture aerosol cans

Application:  Remove organic contaminants from waste stream

Our Solution:  Provide A complete turnkey system including dual water softener systems, dual activated carbon skids, dual deionization skids and a series of cartridge filters.  System is fully automated.

• Water softening to remove minerals that cause hardness and to prevent lime scale build-up.
• Activated carbon to remove odor and organic contaminants.
• Deionization for removal of unwanted impurities.
• Cartridge filters to capture trace suspended solids and as polishing step.

Client Background:  Customer uses aluminum in their manufacturing process

Application:  Remove ions from water using ion exchange process

Our Solution:  Provide Deionization system to further purify city water

Client Background:  Customer uses copper in their manufacturing process.

Application:  Precipitate and remove copper from the waste stream.

Our Solution:  Provide an Inclined Plate Clarifier (IPC) with integral dual chemical injection chambers.  A mixer is mounted in each of the chambers.